986 and 996 Service Advisory
Porsche 986 and 996 Service Advisory
For your seldom-driven cars, we suggest the following services to be performed on an annual basis:
Read the ECU for any fault codes.
Inspect the underside of the vehicle and the engine compartment. Check for any leaks, rubbing of lines or wires, and mounting of the underbody.
Inspect all coolant hoses and radiators; clean out any debris that may have made its way into the ducting.
Check the power-steering system for any leaks- top off the reservoir if needed. Inspect the rest of the steering system including the rack, tie rods, and ends.
Oil filter service- change the oil and filter, cut the existing filter and inspect for the presence of metallic particles.
Inspect brake pads, lines, and hoses. Flush the system if needed.
Inspect the half-shafts for excessive play and torn boots. For all-wheel-drive equipped cars, the drive-shaft is also inspected.
Check all tires for dry-rotting and cracks. Adjust the pressures as needed.
Inspect all drains and crevices for debris.
Inspect the lighting system and adjust as needed. Inspect the horn and all other electrical components.
For the daily-drivers, we suggest the following every 15,000 miles.
Oil filter service- change the oil and filter, cut the existing filter and inspect for the presence of metallic particles.
Check the ECU for any error codes.
Inspect the air-filter, clean or replace if necessary.
Inspect the underside of the vehicle and the engine compartment. Check for any leaks, rubbing of lines or wires, and mounting of the underbody.
Check the power-steering system for any leaks- top off the reservoir if needed. Inspect the rest of the steering system including the rack, tie rods, and ends.
Check coolant level as necessary.
Inspect all coolant hoses and radiators; clean out any debris that may have made its way into the ducting.
Replace the pollen filter.
Inspect brake pads, lines, and hoses. Check the brake fluid level and top-off if needed.
Inspect the half-shafts for excessive play and torn boots. For all-wheel-drive equipped cars, the drive-shaft is also inspected.
Check all tires for dry-rotting and cracks. Adjust the pressures as needed.
Inspect all drains and crevices for debris.
Ensure the correct operation of all locks, latches, and power-lock systems.
2002 and later models will receive special attention to the luggage compartment safety release latches.
Inspect the lighting system and adjust as needed. Inspect the horn and all other electrical components.
Complete windshield washer system inspection- check the fluid level, nozzle aim, and condition of the wipers.
In addition to the above, we also perform the following every 30,000 miles.
Check the condition of the drive-belt.
Complete inspection of the fuel-system- hoses, clamps, and a fuel pressure check.
Inspect the functionality of the e-brake, and address if needed.
Brake fluid flush.
Inspect the throttle position sensor using the PIWIS module.
Inspect the suspension linkages and ensure the correct torque specifications are met.
Nut-and-bolt the exhaust system and check for leaks.
Inspect the seat-belts to ensure correct operation.
In addition to the above, we also perform the following every 60,000 miles.
Replace the drive-belt.
Replace spark-plugs.
Replace fuel-filter.
In addition to the above, we also perform the following every 90,000 miles.
Replace the drive-train fluids (MTF or ATF) and differentials.
Check the air-bag system and the roll-over protection system on cabrios.