Contact Us

Use the form on the right to contact us, or call us using the number below.

Phone: (818) 909-9220

(818) 909-9220

WEVO Engine/Trans Mount

Engine

WEVO Engine/Trans Mount

wevoenginemountphoto1[1].jpg
wevoenginemountphoto1[1].jpg

WEVO Engine/Trans Mount

84.45

Fits the following:

911 1965 – 1971 Engine rear cross beam - 2 required
911 1972 – 1989 Engine rear cross beam – 2 units // transmission mount ('72-'86) – 2 units
930 1976 – 1989 Engine rear cross beam – 2 units

NOTE; A 914 transmission mount version is available now.The 914 hole spacing is close – but not the same as the 911 and the WEVO SS Engine Mount body should not be slotted. 

The WEVO SS Engine Mount is designed to offer virtually the same locating advantages of a solid engine mount – without the metal to metal contact between the chassis and the engine.

The SS Engine Mount comprises of 5 components. The design of the components ensures that at rest, or idle, the engine is firmly located, but free to vibrate against the elastomeric pillows isolating the engine mount inner and outer components. When the engine reacts to torque, the components deflect slightly and the spring rate of the isolators is progressively increased, improving the location of the engine and transmission under more stressful conditions. The design is such that metal to metal contact is always avoided, so potentially harmful misalignment forces and vibrations are managed in a manner more similar to the original factory rubber mounts.

Add To Cart